鼎鑫彩票

 您好,欢迎来到米朗科技官网!厂家直销:电子尺位移传感器拉绳位移传感器磁致伸缩位移传感器LVDT差动变压位移传感器等、集中润滑油泵。 
产品中心


中国工业强基重点产品,传感器“一条龙”应用计划示范企业

高精度传感器“一条龙”应用计划示范项目,欢迎致电24h全球服务热线:18988775303

       

产品中心Product Categories

米朗MIRAN位移传感器和润滑油泵源头厂家品质图标
L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器Product introduction 您现在的位置:首 页 > 产品展示 > 产品详情
L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器
  • 产品详情
  • Product introduction
  • L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器
    L C定量脱压式全封闭稀油分配器/定量全封闭容积式稀油分配器

    工作原理
    A:计量活塞动作行程
    B :伞形双向阀动作行程见上图,从润滑泵压送的
    油从主管A注入,并将伞形双向阀B向推开流入,通过通路C压送活塞室到F内。受压力油作用下计量活塞向下动作弹簧G被压缩蓄油,从而进行计量蓄油,当主管A内油压被释放〈即卸压〉,伞形阀B因压力差而动作,同时开启吐出口E,于是活室内计量蓄油通过吐出口E送入油管H而将油输送到润滑点, 信号销I当计量蓄油时突出.而供油给润滑点时缩回,从而确认分配动作完成情况。

    A: metering piston action schedule
    B: the action trip of the umbrella type two-way valve is shown in the figure above. The oil from the lubrication pump is injected from the director A, and the umbrella-type two-way valve B is pushed open. Push the piston chamber to F through the channel C.The piston moves downward under the action of pressure oil.The spring G is compressed.Thus the measurement of oil storage.When the oil pressure is released in charge of A(the discharge pressure). The umbrella valve B moves with pressure difference. At the same time, it opens the outlet E, so the living room measures the oil storage.The oil is transported to the lubrication point by outlet E to the pipe H, and the signal
    pin I is prominent when measuring the oil storage. When the oil is supplied to the lubrication point, it is retracted to confirm the completion of the distribution.

福建11选5 福建11选5走势图 福建11选5分布走势图 福建11选5走势图 鼎鑫彩票 大鱼彩票官网 福建11选5开奖结果 福建11选5开奖结果查询 福建11选5 福建11选5开奖结果查询